Automatic Screwdriving & Screwfeeding Systems Configurator

Automatic Screwdriving & Screwfeeding Systems Configurator

Product configurator & quote request form:

Complete all of the steps below to configure an automated fastening solution & get a quote based on your application.

We’ve streamlined our automated fastening product selection and price quotation method to make the purchasing decision making process as simple and straightforward for you as possible. Simply enter all of the information the forms asks you below, and we will get back to you within 1-2 business days regarding your quote!

Screwdriver Product Configurator

Step 1: Configure Fastener

Non-Screw Fastener Type:

This configurator is currently only equipped to provide accurate results for screw and set-screw type fasteners, and not the fastener which you have selected. You will not receive configured results, but you can still enter all of the information the form asks you in order to submit a highly-detailed quote request to our sales department.

In millimeters (mm)




Automatic Screwdriving & Screwfeeding Systems Configurator

Automatic Screwdriving & Screwfeeding Systems Configurator

Obstacle around the part / hole which is to be fastened:

Walls or other protruding obstacles often get in the way of the direct screwdriving path, making it difficult to access these areas. To work around this, we employ special bit extend options such as magnetic bit extend or vacuum bit extend, allowing our bit to extend to the part & then drive the screw without touching the part.

In millimeters (mm)
In millimeters (mm)
In millimeters (mm)
In millimeters (mm)
In millimeters (mm)

Automatic Screwdriving & Screwfeeding Systems Configurator

Screw dimensions:

In order to help us better configure your automatic screwdriving & screwfeeding product needs, please reference this chart and fill in the fields below as accurately as possible.

Automatic Screwdriving & Screwfeeding Systems Configurator

Screw dimensions:

In order to help us better configure your automatic screwdriving & screwfeeding product needs, please reference this chart and fill in the fields below as accurately as possible.

Automatic Screwdriving & Screwfeeding Systems Configurator

Screw dimensions:

In order to help us better configure your automatic screwdriving & screwfeeding product needs, please reference this chart and fill in the fields below as accurately as possible.

Automatic Screwdriving & Screwfeeding Systems Configurator

Screw dimensions:

In order to help us better configure your automatic screwdriving & screwfeeding product needs, please reference this chart and fill in the fields below as accurately as possible.

Automatic Screwdriving & Screwfeeding Systems Configurator

Screw dimensions:

In order to help us better configure your automatic screwdriving & screwfeeding product needs, please reference this chart and fill in the fields below as accurately as possible.

Automatic Screwdriving & Screwfeeding Systems Configurator

Screw dimensions:

In order to help us better configure your automatic screwdriving & screwfeeding product needs, please reference this chart and fill in the fields below as accurately as possible.

Automatic Screwdriving & Screwfeeding Systems Configurator

Screw dimensions:

In order to help us better configure your automatic screwdriving & screwfeeding product needs, please reference this chart and fill in the fields below as accurately as possible.

Automatic Screwdriving & Screwfeeding Systems Configurator

Screw dimensions:

In order to help us better configure your automatic screwdriving & screwfeeding product needs, please reference this chart and fill in the fields below as accurately as possible.

Please select the most relevant option.
In millimeters (mm)
In millimeters (mm)
In millimeters (mm)
In millimeters (mm)

Your screw cannot be fed, and you must use a presenter system.

Based on the fastener specifications that you have entered, your screw is not able to be fed conventionally. The best solution for your application is to use a presenter system in order to provide screws to your automatic screwdriving head.
 
Please continue to fill out the form normally, and when you are prompted to choose a feeder or a presenter, select "Presenter". This will not effect your ability to be quoted, or to receive configured results.




Automatic Screwdriving & Screwfeeding Systems Configurator

Automatic Screwdriving & Screwfeeding Systems Configurator

Obstacle around the part / hole which is to be fastened:

Walls or other protruding obstacles often get in the way of the direct screwdriving path, making it difficult to access these areas. To work around this, we employ special bit extend options such as magnetic bit extend or vacuum bit extend, allowing our bit to extend to the part & then drive the screw without touching the part.

In millimeters (mm)
In millimeters (mm)
In millimeters (mm)
In millimeters (mm)
In millimeters (mm)

Step 2: Configure Drive Head

In newton meters (Nm)
In newton meters (Nm)

Step 3: Configure Feeder

Remember: your screw cannot be fed, and you must select "Presenter" in the field above.

How long do you want your feeder to continuously operate without reloading fasteners manually?
So that we know whether or not to show you enclosed feeder designs.

Step 4: Get Results

Your configured results:

Based on the fastener and application specifications that you have entered, we think the following products will most accurately get your job done.

Don't Forget Your Quote!

Don't forget to continue through to Step 5 in order to get a product quote based on the specifications you have entered above!
 
If you are going to click on a product to view that product page, be sure to right click it and select "open link in new tab" so that you don't accidentally leave this page and lose your progress!

Drive Heads:

Here are the drive heads that we think will work for your application:

All Type 5 and 6

All Hand Held

SuperDrive

All MiniMods

MiniMod T1

MiniMod T4

All XMod

XMod Type 1

XMod Type 4

All TwinSlims

TwinSlim T1

TwinSlim T4

All SuperMod

SuperMod T1

SuperMod T4

Non-Screw Fastener Type:

This configurator is currently only equipped to provide accurate results for screw and set-screw type fasteners, and not the fastener which you have selected. You will not receive configured results, but you can still enter all of the information the form asks you in order to submit a highly-detailed quote request to our sales department.

There is no standard solution found for your application. Please continue to Step 5 to submit a quote request, and we will reach out with the most cost-effective custom solution for you!

Feeders / Presenters

Here are the feeders / presenters that we think will work for your application:

A10 & S3.5 Feeders

A10 & S3.5 Presenters

A18 & S6.0 Feeders

A18 & S6.0 Presenters

A24 Feeders

A24 Presenters

S12.0 Feeders

S12.0 Presenters

Non-Screw Fastener Type:

This configurator is currently only equipped to provide accurate results for screw and set-screw type fasteners, and not the fastener which you have selected. You will not receive configured results, but you can still enter all of the information the form asks you in order to submit a highly-detailed quote request to our sales department.

There is no standard solution found for your application. Please continue to Step 5 to submit a quote request, and we will reach out with the most cost-effective custom solution for you!

Step 5: Get A Quote

Address *
Address
City
State/Province
Zip/Postal
Country
3D File Attachments
Drop a file here or click to uploadChoose File
Maximum upload size: 250MB
Please attach any files that are relevant to this job. This includes files / drawings of the part which is to be fastened, files / drawings of the fastener to be used, files / drawings of the desired orientation of the drive head, etc. Max file size is 250 MB. Up to 5 files can be attached to this upload. Preferred file types are STEP, Solidwords files, STL, OBG, PDF, JPG, PNG, and PSD.

When you finish filling out one section, the next section will appear automatically.

Please be sure to scroll all the way to the bottom of the form in order to get a quote based on your application.

Automatic Screwdriving & Screwfeeding Systems Configurator

1. Configure Fastener

Select fastener, enter specifications, and define workspace

Automatic Screwdriving & Screwfeeding Systems Configurator

2. Configure Drive Head

Select your drive head specs, and call out torque.

Automatic Screwdriving & Screwfeeding Systems Configurator

3. Configure Feeder

Do you need a feeder or a presenter? Enclosure? Hopper?

Automatic Screwdriving & Screwfeeding Systems Configurator

4. Get Results

Find out which products will likely suit your application.

Automatic Screwdriving & Screwfeeding Systems Configurator

5. Submit Quote Request

We will contact you with additional info about your quote request within 1-2 business days!