MiniMod Type 2 Drive Head

The MiniMod series of low-torque automatic screwdrivers are designed to seamlessly integrate into low-payload robotic arm assemblies, and can be fitted with most screwdriving tools available on the market today.

WIDG – Drive Head Short Description

Additional information

Torque Capacity

9 Nm

Approximate Weight (without tool)

1.36kg

Approximate Width

25.4mm

Max. Fastener Head Ø

11mm

Max. Fastener Length

38mm

Max. Fastener Shaft Ø

5mm

Fastener Type

Screw, Set Screw, Nut, Bolt, Pin, Stud, Rivet

In Stock

Description

The MiniMod Type 2 Drive Head:

An Automatic Screwdriver Head Engineered
To Suit Your Application

Carlson Engineering automated screw driving machines are designed to work with a screwfeeder or step feeder, and assist in your assembly automation fastening process by automatically advancing the bit driving the screw to torque or depth. Carlson automatic feed screwdriver systems can be fitted with almost any brand of screwdriver on the market today.

Designed For Nut-running

As a Type 2, this drive head is a single-stage device which can be fitted with a vacuum finder tube, and is intended for use with a screw or nut presenter.

For Low Payload Robots

Designed with smaller applications in mind, with the ability to seamlessly integrate into low-payload robotic arm assemblies.

Compatibility

The MiniMod Type 2 Drive Head is intended for use with a presenter (but can also be configured to drive bolts, pins, rivets, set-screws, and more).
Fixtured Robotic Automatic Screwdrivers MiniMod Type 2 Drive Head

MiniMod Type 2 Drive Head

Automatic Screwdriver Head
Anatomy & Features

Our line of high-performance, low maintenance automatic screwdriver equipment consistently & effortlessly increases the efficiency of assembly automation lines, and results in lower cost of operation for automatic screwfeeding and screwdriving.

  • Narrow 25.4mm width
  • 1.36kg weight without screwdriver attachment
  • Can be configured to apply 1 - 7.7kg of force on the screwdriver bit
  • Bit stroke has either 75mm or 150mm to drive fastener
  • Shock absorbers for all slide travel limits
  • Designed for low-torque drivers
  • Linear guide bearings provide long life of tooling
  • Home & extend limit switches
  • Vacuum screw extend option
  • Clean room options available
  • Screw purge integrated directly into drive head
  • Vacuum tube assembly consists of a floating seal, in order to keep a strong vacuum pull during any rotational movements from spindle
  • Designed to fastener specification, allowing it to access hard-to-reach hole locations

Ready to get a quote?

Use Our Personalized Product Configurator.

Enter your fastener & applications specifications into our product configurator to automatically configure a personalized set of drive head & feeder / presenter options for yourself. Take it to the next level, and turn your configured results into a product quote request – or just contact us with your information using our main contact form.

Additional information

Torque Capacity

9 Nm

Approximate Weight (without tool)

1.36kg

Approximate Width

25.4mm

Max. Fastener Head Ø

11mm

Max. Fastener Length

38mm

Max. Fastener Shaft Ø

5mm

Fastener Type

Screw, Set Screw, Nut, Bolt, Pin, Stud, Rivet