| Torque Capacity | 25 Nm |
|---|---|
| Approximate Weight | 3kg |
| Approximate Width | 38mm |
| Max. Fastener Head Ø | 19mm |
| Max. Fastener Length | 76mm |
| Max. Fastener Shaft Ø | 8mm |
| Fastener Type | Screw, Set Screw, Nut, Bolt, Pin, Stud, Rivet |
SlimDrive Type 1 Drive Head
A flexibly designed automatic screwdriver head that can be fitted with a screwdriver with an offset gearbox and allows a side to center clearance. We have been making this drive head since 1990.
Description
The SlimDrive Type 1 Drive Head:
An Automatic Screwdriver Head Engineered
To Suit Your Application
Carlson Engineering automated screw driving machines are designed to work with a screwfeeder or step feeder, and assist in your assembly automation fastening process by advancing the screw or screws to your product, stopping above it, and then advancing the bit driving the screw or screws to torque or depth. Carlson automatic feed screwdriver systems can be fitted with almost any brand of screwdriver on the market today.
Dual Stage Screwdriving
As a Type 1, this drive head is dual-stage device with 2 independently operating travel slides & corresponding Jaw and Bit strokes, making hard to reach areas accessible.
Side to Center Clearnace
Due to the flexible & slim design of this drive head, there is a side to center clearance which allows more flexibility in screwdriving action.
Compatibility
The SlimDrive Type 1 Drive Head is intended for use with a blow-feed automatic screwfeeder or a screw or nut presenter (but can also be configured to drive bolts, pins, rivets, set-screws, and more).
| Torque Capacity | 25 Nm |
|---|---|
| Approximate Weight | 3kg |
| Approximate Width | 38mm |
| Max. Fastener Head Ø | 19mm |
| Max. Fastener Length | 76mm |
| Max. Fastener Shaft Ø | 8mm |
| Fastener Type | Screw, Set Screw, Nut, Bolt, Pin, Stud, Rivet |
SlimDrive Type 1 Drive Head
Automatic Screwdriver Head
Anatomy & Features
Our line of high-performance, low maintenance automatic screwdrivers and screw feeder equipment consistently & effortlessly increases the efficiency of assembly automation lines, and results in lower cost of operation for automatic screwfeeding and screwdriving.
- 38mm wide
- 3kg without screwdriver
- Up to 36kg of downward force that can be applied to screw
- Stroke lengths from 101 - 254mm available
- Screw depth control standard
- Quick screwdriver bit change
- Shock absorbers at all slide travel limits
- Linear guide bearings for long life
- Home and extend limit switches
- Quick change screwdriver mount
- Offset head option for close centers
- Screw presence option with bracket
- Can adapt to most screwdrivers on the market: DC, electric, or air
- Active screw depth control available – uses your part surface as the datum
- Jaw stop prevents jaws from touching part which will eliminate part scuffing
Ready to make an inquiry?
Get A Quote Now For The SlimDrive Type 1 Drive Head
Ready to get a quote?
Use Our Personalized Product Configurator.
Enter your fastener & applications specifications into our product configurator to automatically configure a personalized set of drive head & feeder / presenter options for yourself. Take it to the next level, and turn your configured results into a product quote request – or just contact us with your information using our main contact form.
Additional information
| Torque Capacity | 25 Nm |
|---|---|
| Approximate Weight | 3kg |
| Approximate Width | 38mm |
| Max. Fastener Head Ø | 19mm |
| Max. Fastener Length | 76mm |
| Max. Fastener Shaft Ø | 8mm |
| Fastener Type | Screw, Set Screw, Nut, Bolt, Pin, Stud, Rivet |
Related products
Fixtured Robotic Automatic ScrewdriversXMod Type 6 Magnetic Bit Extend Drive Head
A highly modular, versatile and light weight automatic screwdriving head. This drive head is equipped with a magnetic finder that captures the screw and advances it passed the front of the jaws to the customer product. The magnetic finder can stroke up to 100mm past the front of the jaws. This makes it ideal for for applications were there is very little clearance around the screws install location. It is intended to be used on a 2 or more axis robot or other type of positioning automation.
(0 reviews)
Fixtured Robotic Automatic ScrewdriversXMod Type 4 Drive Head
A highly modular & versatile, single-stage approach to automatic screwdriving head intended to be mounted to a 3 or more axis robot, or other form of automated positioning system.
(0 reviews)
Fixtured Robotic Automatic ScrewdriversSuperMod Type 1 Drive Head
The latest addition to our drive head family capable of handling up to 1000Nm of torque. This dual-stage screwdriving head is intended to be mounted to a 2 or more axis robot or other form of automated positioning system.
(0 reviews)
Fixtured Robotic Automatic ScrewdriversMiniMod Type 1 Drive Head
The MiniMod series of low-torque automatic screwdrivers are designed to seamlessly integrate into low-payload robotic arm assemblies, and can be fitted with most screwdriving tools available on the market today.
(0 reviews)
